The GSM card enables the connection of the Nexo system with a GSM network. Thanks to this integration, a two-way data exchange via SMS becomes possible.
The main product characteristics:
- Integration of the GSM system into the Nexo system
- SMS notifications about events in the Nexo alarm system
- SMS command function for the Nexo system
- Complete integration into the Nexo automation
- Antenna 9 dB
- Supporting all operators SIM cards
- Mounting of the module on the DIN rail (TH-35)
Instantly fitting socket type – plug, the mounting on the DIN rail (TH-35) ensures a convenient and easy installation.
The loop-through connector interface for expansion cards ensures quick installation of multiple cards on a single rail.
Connector for GSM antenna
Connector for the GSM antenna is included in the set.
Drawer for SIM card
The status LEDs inform about the state of the cards in the system as well as the state of the GSM network.
The ventilation holes help to achieve adequate ventilation for the devices placed in the electrical switchboard.
Nexo will send you a SMS if it detects threats like flooding, burglary, fire or gas leaks. A sensor in a room, which activated the alarm, lets you quickly locate the cause and place, so that you can take appropriate action.
You are leaving with your wife for some time, and the children take care of the house?
Nexo can send you a messages if the alarm system is arming or disarming, and also informs you when the small ones are leaving from and returning to home.
Using a GSM card does not only mean getting messages about events in your house, it also enables receiving commands from the user. By sending a blank SMS to the system you will get back a command list, on which the main unit reacts. Like this, you can easily send commands, like for instance: Arm house “password”. After receiving the message, the main unit activates the alarm system, and sends back the message: Armed partition “House”.
If you need to use unusual commands related to your hobbies or habits, you can define your own SMS commands and answers of the main unit. For example, if you would like to check whether the cabriolet is on the driveway or not, just send the message “Is the cabriolet in front of the house?”. If the car crossed the infrared sensors, the main unit interprets this as the car’s presence, so that the system sends the message “The car is safe in front of the house”.
Having the GSM card in use, you can always ask “Is the iron in the laundry room turned off?”. If the system notices that it is turned, it will the message “Yes. Should I turn it off?”. Answering with a short “Yes” turns off the corresponding plug socket, and you will get the message “Done”.
To facilitate the mounting of the modules in the switchboard, each of them is equipped with appropriate connectors, enabling connection of the control cables outside the module, and then plugging the bunch into the appropriate socket. This way of work ensures connection quality and reliability of the module over years. Additional convenience brings the bus rail ensuring digital communication between the devices. Thanks to its use the launch is fast, and the connection of the communication lines is durable and reliable. The whole connection is also aesthetically pleasing and easy for every engineer.
To achieve this you need to install the sensor and properly program the system. You will miss no action.
Nexo will send you a text message with the relevant information, so that you may react before there is a bad surprise for you.
EASY INSTALLATION AND PROGRAMMING
To program quickly standard functions, have a look on the Nexwell Academy. The academy is available via the Knowledge Base → Academy. This is an interactive online module illustrating system logic examples made by Nexwell engineers. These logics with instructions are available for every user of the Nexo system.
NXW499 – Karta GSM