Available versions of Nexo devices for controlling blinds and gates:
NXW221.2 – TUKAN DIN Blind Module
NXW221.4 – TUKAN XT DIN 4x Blind Module
NXW201.2 – TUKAN Blind Module
Blind modules are primarily designed for controlling blinds, awnings, and shutters. They are also suitable for controlling devices with similar mechanisms, such as projection screens, projector lifts, or tilt window actuators.
KEY PRODUCT FEATURES:
1
FAST INSTALLATION
Quick screw-type socket connectors – plug-in, mounted on a DIN rail (TH-35), ensuring hassle-free and fast installation.
2
ADDRESSING
Quick and easy! Each module accepts an address in the range from 0 to 31.
3
LED STATUS DIODES
A quick glance at the LED diodes will indicate the activity status of individual outputs, power supply, and communication with the system. After installation, the backlighting can be turned off to reduce energy consumption.
4
LOCAL INPUTS
Prefer traditional switches? No problem. Built-in local inputs allow connection of both mono and bi-stable buttons commonly available on the market.
5
MANUAL MODE
The electrotechnical method of controlling the module output allows for testing the outputs before starting and programming the system (separates electrical commissioning from building automation). Your electrician will appreciate this!
6
VENTILATION HOLES
Large loads require efficient heat dissipation. The large number of ventilation holes ensures optimal temperature distribution across the electronic components.
- High Load Capacity
- Paired relay outputs with a maximum load of up to 12A
- The maximum total current for a single module is 36A!
- Operating modes – NO (Normally Open) and NC (Normally Closed).
- The use of switching relays allows for controlling devices operating on both 230VAC and 24VDC.
- Device protection:
- Each pair is programmatically protected, preventing simultaneous operation of both outputs, which could result in damaging the connected device.
- Programmable grouping of blinds.
- Create your own groups, such as living room, floor, ground floor, or the entire house. Group control saves time while minimizing your effort.
One controller, many different devices
You can connect not only blinds, facade shutters, roof windows, or electric curtains to the module. For each type of device, we have prepared an appropriate user interface. You can manage them through the mobile app, wall panels, traditional switches, or automation.
Switch at the window, bedside, exit, and on your phone.
Plan it however you prefer. If you want to lower the blinds by the window, install a classic switch next to the window frame.
If you want to control everything from one place, use a multifunctional programmable switch. Centralized closing at the bedside or exit is no problem. If you want to close or open the blinds while you’re away from home, use our mobile app.
Everything in its place.
Nexo Distribution Panel
To make installation easier for the installer, each module is equipped with the appropriate connectors, allowing control wires to be connected outside the module and then plugged into the corresponding socket. This method ensures high-quality connections and the reliability of the module for years. An additional convenience is the busbar, which ensures digital communication between devices. Thanks to its use, the activation of the modules is quick, and the communication line connections are durable and reliable. The entire setup is also aesthetic and clear for any engineer.
EASY INSTALLATION AND PROGRAMMING
Nexwell Academy
To quickly program standard functions, check out the Nexwell Academy. The Academy is available under the Knowledge Base → Academy tab. It is an interactive online module showcasing sample system logics created by Nexwell engineers. These logics, along with instructions, are available to all users of the Nexo systems.
Video Instructions
Visit the Knowledge Base → Video Instructions section. See how easy it is to add and activate the selected Tukan module and other devices in the Nexo system.
